Quick Links
Introduction
This page lists the supported configurations for PDF label printing. If you want to use a setup that is not included in this list, please note that you are responsible for configuring and validating the setup yourself.
The configurations are grouped based on:
Printer make and model
Label size and type, workstation operating system, one-click printing included
Dymo LabelWriter 450
Large Address Labels (89 mm x 36 mm) for macOS with One-Click Printing
Workstation Configuration
Configure ProPrint as follows:
Type: Add a type for the label printer and make a note of the type - you will need it in the Provet PDF printer settings.
Printer: DYMO LabelWriter 450
Width: 36 mm
Height: 89 mm
Orientation: landscape
Top margin: 1 mm
Bottom margin: 1 mm
Left margin: 5 mm
Right margin: 1 mm
Provet Configuration
Enable one-click printing for the clinic location or allow users to enable it for their account.
Configure the Provet PDF printer as follows:
One-click printer type: Edit to match the Type in the ProPrint settings, step 2.
Label preset: Customized or Dymo LabelWriter 450, Large Address Labels (macOS, Provet ProPrint)
Label height (mm): 36
Label width (mm): 89
Resolution (DPI): 144
Rotation: 90°
Top margin (mm): 3
Bottom margin (mm): 0
Left margin (mm): 8
Right margin (mm): 0
Dymo LabelWriter 550
Large Address Labels (89 mm x 36 mm) for Windows with Google Chrome
Provet Configuration
Configure the Provet PDF printer as follows:
Label preset: Customized or Dymo LabelWriter 550, Large Address labels (Windows, Google Chrome)
Label height (mm): 36
Label width (mm): 89
Resolution (DPI): 144
Rotation: 0°
Top margin (mm): 2
Bottom margin (mm): 0
Left margin (mm): 2
Right margin (mm): 6
Note
Note: In the web browser’s printing dialog, select the appropriate paper size ('30321 Large Address') and 'fit to paper' scaling.
Large Address Labels (89 mm x 36 mm) for macOS with Google Chrome
Provet Configuration
Configure the Provet PDF printer as follows:
Label preset: Customized or Dymo LabelWriter 550, Large Address labels (macOS, Google Chrome)
Label height (mm): 36
Label width (mm): 89
Resolution (DPI): 144
Rotation: 0°
Top margin (mm): 2
Bottom margin (mm): 0
Left margin (mm): 2
Right margin (mm): 6
Note
Note: In the web browser’s printing dialog, select the appropriate label size ('custom 35.73 x 88.56mm') and 'fit to paper' scaling.
Large Address Labels (89 mm x 36 mm) for macOS with One-Click Printing
Configure ProPrint as follows:
Type: Add a type for the label printer and make a note of the type - you will need it in the Provet PDF printer settings.
Printer: DYMO LabelWriter 450
Width: 36 mm
Height: 89 mm
Orientation: portrait
Top margin: 0 mm
Bottom margin: 0 mm
Left margin: 0 mm
Right margin: 0 mm
Provet Configuration
Enable one-click printing for the clinic location or allow users to enable it for their account.
Configure the Provet PDF printer as follows:
One-click printer type: Edit to match the Type in the ProPrint settings, step 2.
Label preset: Customized or Dymo LabelWriter 550, Large Address labels (macOS, Provet ProPrint)
Label height (mm): 36
Label width (mm): 89
Resolution (DPI): 144
Rotation: 0°
Top margin (mm): 0
Bottom margin (mm): 2
Left margin (mm): 6
Right margin (mm): 2
Large Address Labels (89 mm x 36 mm) for Windows with One-Click Printing
This set-up has been tested on the Windows 10 operating system.
Workstation Configuration
Open the Control Panel and find the printer in the Devices and Printers. Right-click the printer, select Printing preferences and then Advanced.
Set the following options:
Paper Size: 99012 Large Address
Advanced Printing Features: Enabled
Pages per Sheet Layout: Right then Down
Color Printing Mode: Enhanced
Halftoning: Photo Quality
Media Type: Off
Print Quality: Barcodes and Graphics
Print Density: Normal
Continuous Mode: Disabled
Provet Configuration
Enable one-click printing for the clinic location or allow users to enable it for their account.
Configure the Provet PDF printer as follows:
One-click printer type: Edit to match the Type in the ProPrint settings.
Label preset: Customized or Dymo LabelWriter 550, Large Address labels (Windows, Provet ProPrint)
Label height (mm): 36
Label width (mm): 89
Resolution (DPI): 144
Rotation: 0°
Top margin (mm): 0
Bottom margin (mm): 2
Left margin (mm): 0
Right margin (mm): 2
Zebra ZDesigner GK420d
3” x 2” labels (76 mm x 51 mm) for Windows with Google Chrome
Workstation Configuration
In the operating system's Control Panel, find the printer in the Printers and scanners section, open Printing preferences and set them as follows:
Options:
No. of Copies: 1
Paper Format:
mm
portrait
Width: 76.20
Height: 50.80
Unprintable area: 0 to all
Advanced setup:
Operation Mode: Tear off
Tracking Mode: Web Sensing
Adjustment:
Top: 1.00
Tear off: 0.00
Left position: -0.50
On the Advanced Setup tab, select Calibrate and check that the printer prints two blank labels when calibrating.
Provet Configuration
Configure the Provet PDF printer as follows:
Label preset: Customized or Zebra GK420d, 2" x 3" labels (Windows, Google Chrome)
Label height (mm): 51
Label width (mm): 76
Resolution (DPI): 144
Rotation: 0°
Top margin (mm): 0
Bottom margin (mm): 0
Left margin (mm): 0
Right margin (mm): 0
Note
Note: In the web browser’s printing dialog, select the appropriate paper size ('empty') and 'fit to paper' scaling.
3” x 2” labels (76 mm x 51 mm) for Windows with One-Click Printing
This set-up has been tested on the Windows 10 operating system.
Workstation Configuration
In the operating system's Control Panel, find the printer in the Printers and scanners section, open Printing preferences and set them as follows:
Options:
No. of Copies: 1
Paper Format:
mm
portrait
Width: 76.20
Height: 50.80
Unprintable area: 0 to all
Advanced setup:
Operation Mode: Tear off
Tracking Mode: Web Sensing
Adjustment:
Top: 1.00
Tear off: 0.00
Left position: -0.50
On the Advanced Setup tab, select Calibrate and check that the printer prints two blank labels when calibrating.
Provet Configuration
Enable one-click printing for the clinic location or allow users to enable it for their account.
Configure the Provet PDF printer as follows:
One-click printer type: Edit to match the Type in the ProPrint settings.
Label preset: Customized or Zebra GK420d, 2" x 3" labels (Windows, Provet ProPrint)
Label height (mm): 51
Label width (mm): 76
Resolution (DPI): 144
Rotation: 0°
Top margin (mm): 0
Bottom margin (mm): 0
Left margin (mm): 0
Right margin (mm): 0
Brother QL-820NWBc
Large Address Labels (90 mm x 38 mm) for Windows with Google Chrome
Workstation Configuration
In the operating system's Control Panel, find the printer in the Printers and scanners section, open Printer properties > Advanced tab > select Printing Defaults and set the preferences as follows:
Paper Size: 38mm x 90mm
Orientation: Landscape
Option:
Cut every 1 label
Cut at end
Provet Configuration
Configure the Provet PDF printer as follows:
Label preset: Customized or Brother QL-820NWBc, Large Address labels (Windows, Google Chrome)
Label height (mm): 38
Label width (mm): 90
Resolution (DPI): 144
Rotation: 0°
Top margin (mm): 0
Bottom margin (mm): 0
Left margin (mm): 0
Right margin (mm): 0
Note
Note: In the web browser’s printing dialog, select the appropriate paper size ('38mm x 90mm') and 'fit to paper' scaling.
Large Address Labels (90 mm x 38 mm) for macOS with Google Chrome
Workstation Configuration
Configure the Provet PDF printer as follows:
Label preset: Customized or Brother QL-820NWBc, Large Address labels (macOS, Google Chrome)
Label height (mm): 38
Label width (mm): 90
Resolution (DPI): 144
Rotation: 0°
Top margin (mm): 0
Bottom margin (mm): 0
Left margin (mm): 0
Right margin (mm): 0
Note
Note: In the web browser’s printing dialog, select the appropriate label size ('custom 38mm x 90mm') and 'fit to printable area' scaling.
Large Address Labels (90 mm x 38 mm) for macOS with One-Click Printing
Workstation Configuration
Configure ProPrint as follows:
Type: Add a type for the label printer and make a note of the type you add - you will need it in the Provet PDF printer settings.
Printer: Brother QL-820NWBc
Width: 90 mm
Height: 38 mm
Orientation: portrait
Margins: 0 mm
Provet Configuration
Enable one-click printing for the clinic location or allow users to enable it for their account.
Configure the Provet PDF printer as follows:
One-click printer type: Edit to match the Type in the ProPrint settings, step 2.
Label preset: Customized or Brother QL-820NWBc, Large Address labels (macOS, Provet ProPrint)
Label height (mm): 38
Label width (mm): 90
Resolution (DPI): 144
Rotation: 0°
Top margin (mm): 0
Bottom margin (mm): 0
Left margin (mm): 0
Right margin (mm): 0
Large Address Labels (90 mm x 38 mm) for Windows with One-Click Printing
This set-up has been tested on the Windows 10 operating system.
Workstation Configuration
Find the printer in the Printers & Scanners settings, select Manage, go to Printer properties > Advanced tab and select Printing Defaults.
Set the following options:
Paper Size: 38mm x 90mm
Cut Every 1 labels
Cut at end
Provet Configuration
Enable one-click printing for the clinic location or allow users to enable it for their account.
Configure the Provet PDF printer as follows:
One-click printer type: Edit to match the Type in the ProPrint settings.
Label preset: Customized or Brother QL-820NWBc, Large Address labels (Windows, Provet ProPrint)
Label height (mm): 38
Label width (mm): 90
Resolution (DPI): 144
Rotation: 0°
Top margin (mm): 0
Bottom margin (mm): 2
Left margin (mm): 0
Right margin (mm): 6
Validation
View and print the generic test label in the PDF printer settings. Also test the printer configuration with template-specific test labels or an actual label to check the need to customise the margins.